Skip to content

Licensed, bonded, insured, 14 years in business. Free look: (317) 597-8432

(317) 597-8432
Roofer in a yellow safety harness kneels on a sloped roof, drilling to fasten dark standing-seam metal panels beside exposed underlayment, with a ladder at the eave

ServicesMetal Roofing

Metal Roofing in Speedway

We install metal roofs on homes in Speedway and nearby towns, starting with what is under your current roof. Plank decking, stacked shingle layers and patched flashing get checked first, so your new metal roof goes on a solid base and lasts the way it should.

Is a metal roof right for your home?

A metal roof can outlast two or three shingle roofs. It sheds snow quickly, holds up well against strong wind and weighs less than most people expect, often less than the old asphalt layers it replaces.

On an older house, the deck under the roof matters as much as the panels. Many homes built before plywood was common sit on plank boards, and some carry two layers of shingles plus decades of patches. We take it down to the wood, show you photos of what we find and tell you plainly whether metal makes sense or whether a shingle roof is the better fit for your budget.

Roofing Speedway is licensed, bonded and insured. In 14 years in business, we have learned that most surprises on a decades-old roof can be predicted, as long as someone looks for them before the panels are ordered.

What our metal roof installs include

Full tear-off to the deck

We remove every old layer down to the boards. Covering old shingles with metal can hide rot and trap moisture, so we don't recommend it on older homes.

Deck repair and new sheathing

Soft, cracked or gapped plank boards get replaced or covered with new sheathing so every screw and clip bites into solid wood. You see the photos and the line items before we do the work.

Underlayment and ice barrier

Metal can collect condensation on its underside during cold snaps. A high-temperature synthetic underlayment, with ice and water barrier along the eaves and valleys, keeps that moisture off the deck.

New flashing and trim

Tar-covered patches and bent step flashing come off. We install new flashing at chimneys, walls and vents, matched to the panels, because those spots are where most leaks on aging roofs begin.

Ventilation updates

Plenty of attics from past decades have a couple of small vents and nothing more. We add ridge and intake ventilation so the attic stays drier in winter and cooler in summer.

Cleanup and walk-through

Loose screws and metal offcuts are easy to miss in grass, so we sweep the yard, garden beds and drive with a magnet before we leave. The debris goes with us, and we walk around your home together before we call the job finished.

Roofer in a tool belt stands on an extension ladder photographing the shingle roof and vents of a ranch home, with a dump trailer in the driveway on an overcast day

Signs metal may be your next roof

You're on your second or third shingle roof
If you would rather not replace the roof again in twenty years, metal is worth pricing out. It costs more now and asks for far less later.
Ice dams keep coming back
Metal sheds snow faster than shingles. Paired with better ventilation, it cuts down on the ice that builds along the eaves of poorly vented homes.
Storm repairs keep adding up
If wind and hail have you scheduling repairs every few springs, a well-fastened metal roof can break that cycle. For fresh damage you are dealing with right now, our Storm Damage Repair page walks through how we handle it.
Your roof is a patchwork
Mismatched shingles, roof cement smeared around every vent and a second layer nailed over the first all point to a roof that has been kept going rather than fixed.
You plan to stay put
Metal pays off over many years. If this is the house you intend to keep, the long service life works in your favor.

How a metal roof job goes

  1. 1

    Free roof inspection

    We look over the roof surface, flashing and attic, measure every slope and bring panel profiles and color samples to compare. Afterward you receive a written estimate broken out line by line, along with a straight opinion on whether metal fits your home.

  2. 2

    Ordering and permits

    Because many panels are made to the exact length of each slope, our measurements have to be right, and nothing gets ordered until you sign off. We pull the permit where your town requires one.

  3. 3

    Tear-off and deck work

    We cover landscaping, the AC unit and nearby windows, then strip to the deck. If boards need replacing, we show you before the new sheathing goes down, so the cost does not catch you off guard.

  4. 4

    Installation

    Underlayment, drip edge and flashing go on first, then the panels and ridge cap. On standing seam roofs, concealed clips let panels expand and contract through hot summers and cold winters without working the fasteners loose.

  5. 5

    Final check

    We inspect every seam and flashing detail, clean up thoroughly and go over the finished roof with you.

What affects the price of a metal roof

Metal costs more up front than asphalt, and a simple roof and a complicated one can land far apart. Our estimate comes from what we actually find at your inspection, with each piece of the work listed on its own, so nothing is bundled out of sight. If spreading the cost out would help, ask us about financing.

Panel type
Standing seam with hidden fasteners costs more than exposed-fastener panels, but it needs less upkeep over time. We will explain both so you can choose.
Roof size and shape
Dormers, valleys, chimneys and steep pitches mean more cutting, more flashing and more careful work.
Deck condition
Rotted or gapped plank boards on older homes may need repair or a full layer of new sheathing before metal can go on.
Layers to remove
Two or three old shingle layers take longer to tear off and add disposal weight.
Ventilation and permits
Adding ridge and intake vents and meeting local permit requirements are part of the price, shown as separate lines so you can see what each costs.

Metal roofing questions we hear often

Will rain sound louder on a metal roof?
With a solid deck, underlayment and an insulated attic below, most homeowners notice little difference from shingles. The drumming people picture comes from panels fastened straight to open rafters, the way a barn or shed is built. A properly layered residential roof muffles that sound.
Can you install metal over my existing shingles?
It can be done, but we don't recommend it on older homes. Old layers can hide soft decking and trap moisture under the new panels. Tearing off lets us fix the deck and flashing properly.
Will metal work on my older house?
Usually, yes. Metal is light, so it rarely strains the framing. The bigger question is the deck, and we check that during the free inspection and tell you exactly what it needs.
Does metal make my house more likely to be hit by lightning?
No. Lightning goes for the tallest point in the area, and the roofing material plays no real part in that. Steel and aluminum also don't burn, so a strike on a metal roof is less likely to start a roof fire.
What happens if hail hits a metal roof?
Large hail can leave dents, especially on thinner panels. Heavier-gauge panels resist it better, and small dents are usually cosmetic rather than leaks. We can talk through panel options that suit how much hail you are willing to risk.
Do you offer financing for metal roofs?
Yes, we offer financing. We can go over the options when we review your estimate together, so you can pick a payment plan that fits your budget.
Brick ranch house with a dark brown shingle roof, ladder against the eave, tarp, trash can and tool cases on the driveway under an overcast sky

Find out what's under your roof first

Before you choose metal, it helps to know the condition of your deck, flashing and attic. We will look it all over and give you a clear, written estimate.